simple description:The 3-in-1 machine's integrated design ensures that the raw materials are dried in a completely closed system, avoiding the re-moisture of the dried raw materials due to contact with the outside air to achieve a good drying effect.
weight :340.00
unit weight:KG
characteristic:For Plastic Material Drying
patent:Intelligent Drying System Control Software
manufacturer:HENGJU
Producing country:CHINA
Product alias:3-in-1 machine
3 in 1 Dehumidifier Dryer Product introduction
3 in 1 Dehumidifier Dryer parameter
Model
HCF-120150
Dryer Hopper
Capacity (KG)
150
Heat Protection Material
Fiberglass+Staninless Steel
Dry-Air Dew point
-35℃ to -45℃
Temperature (℃)
80-180
Air Flow (m^3/h)
120
Blower Power (KW)
1.1
Regeneration Blower (KW)
0.375
Drying Heater (KW)
7
Regeneration Heater (KW)
3.8
Pipe Sizes
Drying (mn)
51
Cooling (lnch)
3/4"
Regeneration (mn)
38
Conveying Blower (KW)
0.75
Conveying Distance (m)
Stage 1
6-10
Stage 2
6-10
Hose Size (Inch)
1.5
Sensor Hopper Capacity (L)
7.5
Vacuum Hopper Capacity (L)
7.5
Dimension LxWxH (cm)
100×87×180
Approx.Net Weight (KG)
340
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H; We reserve the right to change spencifications without prior notice.
3-in-1 machine
3 in 1 Dehumidifier Dryer Equipment principle
3-in-1 machine
3 in 1 Dehumidifier Dryer application
In the production process of plastic products, the moisture problem bothers all processors. The rotary dehumidifier is widely used for drying all kinds of plastics, especially engineering plastics with strong hygroscopicity (such as PA, PC, PBT, PET, etc.) for high-efficiency dehumidification.
3-in-1 machine
3 in 1 Dehumidifier Dryer Precautions
1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual. 2, please do not use the power supply other than that specified. 3, please complete the specified grounding project. (Yellow power cord) 4, the door of the control box must not be opened at will during the power-on process. 5, it is forbidden to touch the machine body, control part and other accessories with wet hands. Product alias:
163.com