Mold temperature controller for Blow Molding Machine Details description
product name：Mold temperature controller for Blow Molding Machine
release time:2020-06-03 11:19:25
Numbering:HJW-122012
Brand:HENGJU
Price:￥variable
simple description:Mold temperature controller is widely used in plastic production industry.
weight :80.00
unit weight:KG
characteristic:For adjusting mold temperature
patent:Mold temperature controlling
manufacturer:HENGJU
Producing country:CHINA
Product alias:MTC
Mold temperature controller for Blow Molding Machine Product introduction
Mold temperature controller for Blow Molding Machine parameter
Model
HJW-122012
Transter Medium
water
Temp.Range
35℃-120℃
Pump (HP)
2
Pump Flow (L/min)
110
Heating Power (KW)
12
Inlet/Outlet Diameter
3/8'' 4inltes 4 outlets
Cooling Method
Direct cooling
Dimension(mm)
800*330*750
Net Weight(KG)
80
MTC
Mold temperature controller for Blow Molding Machine Equipment principle
MTC
Mold temperature controller for Blow Molding Machine application
Mold temperature controller is widely used in plastic production industry. And by using MTC, customers can get: 1.Improve the molding efficiency of the product; 2. Reduce the production of defective products; 3. Improve the appearance of the product and suppress the defects of the product; 4. Speed up production progress, reduce energy consumption and save energy.
MTC
Mold temperature controller for Blow Molding Machine Precautions
1. Please check the cooling water circulation before use to prevent damage to the mold temperature machine due to insufficient cooling water. We must keep the working environment of the mold temperature machine clean from dust, which can greatly extend the service life of the electrical components. 2. For new MTC, we need to make different maintenance measures according to the heat conduction medium. If the medium is water, we must keep the water source clean, so that it is not easy to scale, and it can also prevent the pipeline from being blocked. For oil medium, we need to replace it regularly according to the use temperature. For the temperature above 200 ℃, we need to replace it once a month or two, and below 200 ℃, we can replace it once a quarter or so, which is very good It avoids the problem that the temperature cannot be increased. 3. As for pipeline, we should judge whether the pipeline is blocked according to the connection between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter mesh at the entrance of the system. It is best to clean the hood once a month. 4. Regularly check the mold temperature machine water pump and oil pump for oil leakage. If necessary, the pump shaft seal can also be replaced regularly. 5. On electrical components, we can replace them in time according to the service life of the components and test them regularly to ensure safety. Product alias:
163.com